Changing/Deleting Speed Dial Information - Konica Minolta bizhub C25 Facsimile Manual

Changing/Deleting Speed Dial Information

The registered speed dial information can be changed.
1
Press the + or , key to select [UTILITY], and then press the Select key.
2
Press the + or , key to select [DIAL REGISTER], and then press the
Select key.
3
Press the + or , key to select [SPEED DIAL], and then press the Select
key.
The [SPEED DIAL] screen appears.
4
Use the keypad to type in the speed dial number(1-220) to be edited/
deleted, and then press the Select key.
d
5
Press the + or , key to select [EDIT] or [DELETE], and then press the
Select key.
–
If [EDIT] was selected, the name is displayed. Continue with step 6.
–
If [DELETE] was selected, the settings registered with the speed dial
number are deleted. This completes the procedure when it is deleted.
6
If desired, edit the name, fax number, modem speed and batch transmis-
sion settings, and then press the Select key.
The edited information is registered with the speed dial number.
d
d
d
Speed Dialing
For details on entering/editing text and the characters that can be
entered, refer to "Entering Text" on page 9-4.
If the edited speed dial destination is registered in the favorite list,
with a group dial destination or as forwarding settings, a message
appears, requesting confirmation to leave the edited speed dial
destination registered as it is. To leave it registered as it is, select
[YES]. To not leave it registered as it is, select [NO]. Then, press
the Select key.
If a document is queued in the memory for a batch transmission
and the batch transmission time is changed, the document in the
memory will be sent at the time before the setting was changed.
For details on editing text, refer to "Entering Text" on page 9-4.
6-7