Sending a Fax Using the Original Glass
1
Press the Fax key to enter Fax mode.
d
2
Remove all documents from the ADF.
d
3
Lift to open the ADF cover.
4
Place the original document
face down on the original glass
and align the document on the
scales above and to the left of
the original glass.
5
Gently close the ADF cover.
d
6
Select the document image quality.
d
7
Specify the fax number of the recipient in one of the following ways:
–
Direct dialing
–
Using the favorite list
–
Using the Speed Dial function
–
Using the Group Dial function
–
Using the Address Book functions
–
Using the Redial/Pause key
d
Basic Fax Operation
If the initial mode ([UTILITY] - [MACHINE SETTING] - [INITIAL
MODE]) is set to [FAX], this step can be skipped.
If you are using the original glass to scan, do not load any docu-
ments into the ADF.
Closing it too quickly may cause the document to move on the
original glass.
For details on selecting the document image quality, refer to
"Selecting the Image Quality" on page 3-7.
For details on specifying the recipient, refer to "Specifying a
Recipient" on page 3-9. For details on using the Redial/Pause
key, refer to "Using the Redial Function" on page 3-13.
3-5