Upgrade Considerations; Upgrading Nsm; Deprecated Operating System; Limitations - Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 1 Release Note

Upgrade Considerations

Upgrading NSM

Deprecated Operating System

Limitations

Copyright © 2010, Juniper Networks, Inc.
This section contains information about upgrading NSM and deprecated operating
systems.
You can upgrade to NSM 2010.4 from the following versions:
2008.2RX
2009.1RX
2010.1
2010.2
2010.3
NSM 2010.4 supports:
3000 low-end devices with 10 user connections
300 high-end devices with 25 user connections
NSM no longer supports ScreenOS version 4.X. You must upgrade your devices to
ScreenOS version 5.0 or later. NSM no longer supports Junos OS Release 9.2 or earlier.
The following items are known limitations in this version of NSM:
NSM does not support Junos OS downgrades. However, if you need to downgrade a
device, follow these steps:
From the device, use the CLI command to downgrade the image. For example:
1.
root> request system software add <package-name> reboot
After the downgrade, from NSM, delete the device and then add it again.
2.
For Junos OS J Series and EX Series devices—NSM Configuration Editor cannot
completely validate the configuration that an NSM user has created before sending it
to the device. The device validates the configuration when the configuration is pushed
to the device as part of the Update Device job and may return validation errors to NSM.
For SSL VPN SA and Infranet Controllers—Secure Virtual Workspace (SVW) settings
on the SA device cannot be managed with NSM.
For EX Series switches—EX Series switches running Junos OS do not support snapshots.
Therefore, users should not select the "Backup the current filesystem(s) on the device"
check box in the final page of the Install Device Software wizard.
Upgrade Considerations
3