Juniper JUNOSE 11.0.X PHYSICAL LAYER Configuration Manual page 236

JUNOSe 11.0.x Physical Layer Configuration Guide
show ip mac-validate interface
214
Monitoring Ethernet Interfaces
Out: Bytes 0, Unicast 0
Multicast 0, Broadcast 0
Errors 0, Discards 0, Mac Errors 0, Deferred 0, No Carrier 0
Collisions: Single 0, Multiple 0, Late 0, Excessive 0
Policed Statistics:
In: 0, Out: 0
ARP Statistics:
In: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Out: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Administrative qos-shaping-mode: none
Operational qos-shaping-mode: frame
queue 0: traffic class control, bound to GigabitEthernet2/0
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
See show interfaces.
Use to display the status of the MAC address validation on the physical interface.
Field descriptions
FastEthernet interfaceSpecifier On the ERX14xx models, ERX7xx models,
and ERX310 router , the Fast Ethernet or Gigabit Ethernet interface slot/port;
on the E120 and E320 routers, the Gigabit Ethernet or 10-Gigabit Ethernet
interface slot/adapter/port
Keyword assigned to interface Options: Strict or Loose
Address IP address of the entry
Hardware Addr Physical (MAC) address of the entry
Example
host1:boston#show ip mac-validate interface fastEthernet 11/0
FastEthernet11/0: Strict
Address
3.3.3.3
4.4.4.4
See show ip mac-validate interface.
Hardware Addr
0090.1a30.3365
0090.1a30.3368