Juniper ADVANCED INSIGHT SCRIPTS 2.5 - RELEASE NOTES REV 1 Release Note page 9

Table 1: Events Detected by AI-Scripts (continued)
EVENT ID
CHASSISD_FM_ERROR
CHASSISD_FM_ERROR_SIB_L_FB_HSR
CHASSISD_FM_ERROR_SIB_L_FB_SMF
CHASSISD_FM_ERROR_SIB_S_FB_HSR
CHASSISD_FM_ERROR_SIB_S_FB_SMF
CHASSISD_FM_SIB_ERROR
CHASSISD_FPC_PIC_DETECT_TIMEOUT
CHASSISD_FRU_INVALID_SLOT
CHASSISD_GBUS_NOT_READY
©
Copyright 2010, Juniper Networks, Inc.
DESCRIPTION
During execution of the indicated fabric management routine, the indicated
error occurred between the indicated Switch Interface Board (SIB) and the
indicated Packet Forwarding Engine on the indicated Flexible PIC
Concentrator (FPC).
In a routing matrix, packets traverse both electrical and optical media as
they travel between the Switch Interface Boards (SIBs) in the T640 router
(called SIB-Ls) and the SIBs in the TX Matrix platform (called SIB-Ss). The
chassis process (chassisd) on the routing node that houses the indicated
SIB-L detected an error in the electrical path between the indicated ports
on the SIB-L and the corresponding SIB-S.
In a routing matrix, packets traverse both electrical and optical media as
they travel between the Switch Interface Boards (SIBs) in the TX Matrix
(the switch-card chassis, or SCC) and the SIBs in the T640 routers (called
SIB-Ls). The chassis process (chassisd) on the T640 router that houses
the indicated SIB-L detected the indicated error as packets that were
traveling in the indicated direction were translated between electrical and
optical media.
In a routing matrix, packets traverse both electrical and optical media as
they travel between the Switch Interface Boards (SIBs) in the TX Matrix
platform (called SIB-Ss) and the SIBs in the T640 routers (called SIB-Ls).
The chassis process (chassisd) on the TX Matrix detected an error in the
electrical path between the indicated port on the indicated SIB-S and the
indicated port on a SIB-L installed in the indicated T640 router (line-card
chassis, or LCC).
In a routing matrix, packets traverse both electrical and optical media as
they travel between the Switch Interface Boards (SIBs) in the TX Matrix
(called SIB-Ss) and the SIBs in the T640 routers (line-card chassis, or
LCCs). The chassis process (chassisd) on the TX Matrix platform detected
the indicated error as packets that were traveling to or from the indicated
LCC were translated between electrical and optical media.
The chassis process (chassisd) detected the indicated type of error on the
indicated Switch Interface Board (SIB) and performed the indicated action.
The chassis process (chassisd) expects to receive notification within a
timeout period that each Flexible PIC Concentrator (FPC) has attached the
PIC that it houses. It did not receive notification from the indicated FPC.
The chassis process (chassisd) detected that the indicated hardware
component (field-replaceable unit, or FRU) was inserted in a slot that is not
valid for that component type.
The GBUS was not ready when the chassis process (chassisd) first tried to
power it on, and the power-up operation timed out.
Events Detected by AI-Scripts
9