Juniper ADVANCED INSIGHT SCRIPTS 2.5 - RELEASE NOTES REV 1 Release Note page 7

Table 1: Events Detected by AI-Scripts (continued)
EVENT ID
CHASSISD_COMMAND_ACK_ERROR
CHASSISD_COMMAND_ACK_SFM_ERROR
CHASSISD_FAN_FAILURE
CHASSISD_FASIC_FTOKEN_ERROR
CHASSISD_FASIC_FTOKEN_INIT_ERROR
CHASSISD_FASIC_HSL_CONFIG_ERROR
CHASSISD_FASIC_HSL_LINK_ERROR
CHASSISD_FASIC_INIT_ERROR
CHASSISD_FASIC_INPUT_DROP
CHASSISD_FASIC_OUTPUT_DROP
CHASSISD_FASIC_PIO_READ_ERROR
©
Copyright 2010, Juniper Networks, Inc.
DESCRIPTION
The chassis process requested that the indicated component (field-
replaceable unit, or FRU) confirm that it was online. The indicated error
occurred when the FRU sent its response. In the normal case, the chassis
process performed any additional action necessary to guarantee that the
FRU came online.
The chassis process (chassisd) requires an acknowledgment from each
Switching and Forwarding Module (SFM) before it registers a Flexible PIC
Controller (FPC) as online. The acknowledgment message from the
indicated SFM failed for the indicated FPC.
The indicated fan or impeller failed. The chassis process (chassisd) raised
an alarm and increased the speed of the remaining fans (and impellers, if
applicable) to full speed.
The chassis process (chassisd) detected an underflow or overflow error on
the indicated F chip on the indicated Control Board (CB).
The chassis process (chassisd) encountered an error while initializing
memory at the indicated address for the indicated F chip on the indicated
Control Board (CB).
The chassis process (chassisd) could not configure high-speed links (HSL)
for the indicated F chip on the indicated Control Board (CB).
The chassis process (chassisd) detected an error for the indicated high-
speed link (HSL) for the indicated F chip on the indicated Control Board
(CB).
The chassis process (chassisd) detected that F chips were not yet
initialized on the Control Board (CB).
The Packet Forwarding Engine divides packets into smaller units called
cells for more efficient processing. As the indicated F chip on the indicated
Control Board (CB) processed data that was received from the indicated
Packet Forwarding Engine on the indicated Flexible PIC Concentrator
(FPC), it dropped the indicated number of cells per second.
The Packet Forwarding Engine divides packets into smaller units called
cells for more efficient processing. As the indicated F chip on the indicated
Control Board (CB) processed data before sending it to the indicated
Packet Forwarding Engine on the indicated Flexible Port Concentrator
(FPC) for outgoing transmission, it dropped the indicated number of cells
per second.
The indicated routine failed with a read error at the indicated address and
register for the indicated F chip and link on the indicated Control Board
(CB).
Events Detected by AI-Scripts
7