Juniper ADVANCED INSIGHT SCRIPTS 2.5 - RELEASE NOTES REV 1 Release Note page 18

Advanced Insight Scripts (AI-Scripts) 2.5 Release Notes
Table 1: Events Detected by AI-Scripts (continued)
EVENT ID
L2CPD_SCHED_SLIP
L2CPD_SYSTEM_CALL_FAILED
L2TPD_EVLIB_CREATE_FAILED
L2TPD_EVLIB_CREATE_FAILED
L2TPD_SERVER_START_FAILED
LIBESPTASK_SNMP_CONN_PROG
LIBESPTASK_SNMP_SOCKOPT_RECVBUF
LIBESPTASK_SNMP_SOCKOPT_SENDBUF
LIBJNX_DEFAULT_IP_ADDR_NOT_SET
LIBJNX_EVLIB_FAILURE
LIBJNX_EXEC_SIGNALED
LIBJNX_REPLICATE_RCP_ERROR
LIBJNX_SNMP_ENGINE_FILE_FAILURE
LIBJNX_SNMP_ENGINE_SCAN_FAILURE
LIBJNX_SOCKET_FAILURE
LIBJSNMP_NS_LOG_EMERG
LIBMSPRPC_CLIENT_INIT_FAILED
LIBMSPRPC_CLIENT_KCOM_FAILED
18
DESCRIPTION
The Layer 2 Control Protocol process (l2cpd) delayed an event, such as
issuing an adjacency establishment message that was supposed to occur at
a particular time. The event did not occur at the right time.
A system call made by the Layer 2 Control Protocol process (l2cpd) failed.
The Layer 2 Tunneling Protocol process (l2tpd) could not create a context
for handling asynchronous events.
The Layer 2 Tunneling Protocol process (l2tpd) could not create a context
for handling asynchronous events.
The Layer 2 Tunneling Protocol (L2TP) server did not start.
The indicated error occurred while the process using libesptask was
connecting to the SNMP master agent.
The process using libesptask could not set the size of the kernel receive
buffer, which allows it to accept the largest possible packet from the Simple
Network Management Protocol (SNMP) master agent.
The process using libesptask could not set the size of the kernel send
buffer, which allows it to send the largest possible packet to the Simple
Network Management Protocol (SNMP) master agent.
A Junos process could not retrieve the system default IP address from the
kernel because the address is not defined there.
A Junos process called the indicated function in the event library. The
function failed for the indicated reason.
A Junos process created a child process to execute the indicated command.
The child process received the indicated signal and exited.
The rcp command failed during replication.
A Junos process could not perform the indicated operation on the indicated
SNMP engine data file.
A Junos process could not perform the scan operation on the indicated
SNMP engine data file.
Various system processes use Transmission Control Protocol (TCP), User
Datagram Protocol (UDP), and Reliable Data Protocol (RDP) sockets. The
indicated socket operation failed for the indicated reason.
SNMP errors with LOG_EMERG as severity.
A Junos process (mspinfo) could not establish initialization of the RPC
client.
A Junos process (mspinfo) could not establish initialization of the KCOM
subsystem.
©
Copyright 2010, Juniper Networks, Inc.