Juniper ADVANCED INSIGHT SCRIPTS 2.5 - RELEASE NOTES REV 1 Release Note page 36

Advanced Insight Scripts (AI-Scripts) 2.5 Release Notes
NOTE: If you configure the load-scripts-from-flash option, the system reads AI-
Scripts from the /config/scripts/ directory; otherwise, the system reads AI-
Scripts from the /var/db/scripts/ directory. The /var/run/scripts directory will
always point to the right scripts directory.
3. Verify that the syntax of a configuration is correct by using the configuration mode commit
4. Commit the configuration. To save software configuration changes to the configuration
5. View the configuration:
Example Configuration for AIM
Example Configuration for Junos Space
36
check command:
[edit]
user@host# commit check
configuration check succeeds
database and activate the configuration on the router, use the commit configuration mode
command. You can issue the commit command from any hierarchy level.
[edit]
user@host# commit
commit complete
groups {
juniper-ais {
system {
scripts {
commit {
}
load-scripts-from-flash;
}
}
event-options {
destinations {
juniper-aim {
. . .
groups {
juniper-ais {
system {
scripts {
commit {
}
}
}
allow-transients;
file jais-activate-scripts.slax {
optional;
}
archive-sites {
"ftp://anonymous@10.7.0.124/aimdemo";
}
allow-transients;
file jais-activate-scripts.slax {
optional;
}
©
Copyright 2010, Juniper Networks, Inc.