Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910331 CHAP 10 Manual page 93

Mid Gain The amount of boost or cut that the mid parametric Þlter should apply in dB. Every
increase of 6 dB approximately doubles the amplitude of the signal. Positive values boost
the signal at the speciÞed frequency. Negative values cut the signal at the speciÞed
frequency. [MonoDistort + EQ and StereoDistort+EQ]
Mid Freq The center frequency of the mid parametric Þlter in intervals of one semitone. The boost or
cut will be at a maximum at this frequency. [MonoDistort + EQ and StereoDistort+EQ]
Mid Wid The bandwidth of the mid parametric Þlter may be adjusted. You specify the bandwidth
in octaves. Small values result in a very narrow Þlter response. Large values result in a
very broad response. [MonoDistort + EQ and StereoDistort+EQ]
KDFX Reference
KDFX Algorithm Specifications
10-93