Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910331 CHAP 10 Manual page 76

KDFX Reference
KDFX Algorithm Specifications
Dly FBImag, Dly Xcouple, Dly HFDamp, and Dly LFDamp are just like those found in other algorithms.
Not all Laser Delays in combination algorithms will have all four of these parameters due to resource
allocation.
L Input
Figure 10-29
Parameters for Laser Delay
Dly Time L
Dly Fdbk L
Dly HFDamp
Dly LFDamp
LsrCntourL
LsrSpace L
Dly Time
Dly Fdbk
Dly HFDamp Controls the cutoff frequency of a 1 pole (6dB/oct slope) lopass Þlter in the feedback path.
Dly LFDamp
Dly FBImag
10-76
From Right
Channel
Delay Feedback
To Right
Channel
Laser Delay (left channel)
0 to 6 bts
-100 to 100 %
0 to 32 bts
0.10 to 6.00 x
0 to 100 %
0 to 100 samp
Left and Right. The delay lengths of each channel in beats. The duration of a beat is
speciÞed with the Tempo parameter. The delay length in seconds is calculated as beats/
tempo * 60 (sec/min).
Left and Right. The amount of the output of the effect that is fed back to the input.
The Þlter is heard when either Dly Fdbk or LsrCntour is used.
Controls the cutoff frequency of a 1 pole (6dB/oct slope) hipass Þlter in the feedback path.
The Þlter is heard when either Dly Fdbk or LsrCntour is used.
This parameter controls the amount of image shifting during each feedback regeneration,
and is heard only when Dly Fdbk is used. Small positive values shift the image to the
right, while small negative values shift to the left. Larger values tend to shift the image so
far that the image gets scrambled, and in some cases create ambience.
Delay
XCouple
To Right
Channel
Imaging
From Right
Channel
Dly Time R 0 to 6 bts
Dly Fdbk R -100 to 100 %
Dly FBImag -100 to 100 %
Dly Xcple 0 to 100%
LsrCntourR 0 to 100 %
LsrSpace R 0 to 100 samp
Laser
L Output
Element