Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910331 CHAP 10 Manual page 133

Wet/Dry
Out Gain
Pitch
Ptch Offst
All other parameters
The relative amount of input signal and effected signal that is to appear in the
Þnal effect output mix. When set to 0%, the output is taken only from the input
(dry). When set to 100%, the output is all wet.
The overall gain or amplitude at the output of the effect.
The fundamental pitch imposed upon the input. Values are in MIDI note
numbers.
An offset from the pitch frequency in semitones. This is also available for
adding an additional continuous controller mod like pitch bend.
These parameters control the exact shape of the frequency response of Pitcher.
An exact description of what each one does is, unfortunately, impossible, since
there is a great deal of interaction between them. For examples, examine the
Þgures above.
KDFX Reference
KDFX Algorithm Specifications
10-133