Parameters for Dual Res Filter
Page 1
L Wet/Dry
0 to 100%wet
L Output
Off, -79.0 to 24.0 dB
Page 2
L FiltType
Lowpass
L Freq
58 to 8372 Hz
LResonance
0 to 50 dB
Wet/Dry
The amount of Þltered (wet) signal relative to unaffected (dry) signal.
Out Gain
The overall gain or amplitude at the output of the Þlter.
FilterType
The type of resonant Þlter to be used. May be one of ÒLowpassÓ, ÒHighpassÓ, ÒBandpassÓ,
or ÒNotchÓ.
Frequency
The frequency of the resonant Þlter peak (or notch) in Hz. The frequencies correspond to
semitone increments.
Resonance
The resonance level of the resonant Þlter. Resonance sets the level of the resonant peak (or
the amount of cut in the case of the notch Þlter).
R Wet/Dry
0 to 100%wet
R Output
Off, -79.0 to 24.0 dB
R FiltType
Highpass
R Freq
58 to 8372 Hz
RResonance
0 to 50 dB
KDFX Reference
KDFX Algorithm Specifications
10-121
Need help?
Do you have a question about the K2600 - MUSICIANS GUIDE REV A PART NUMBER 910331 CHAP 10 and is the answer not in the manual?