Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910331 CHAP 10 Manual page 167

963 AutoPanner
A stereo auto-panner
PAUs: 1
AutoPanner is a 1 processing allocation unit (PAU) stereo auto pan effect. The process of panning a stereo
image consists of shrinking the image width of the input program then cyclically moving this smaller
image from side to side while maintaining relative distances between program point sources (Figure 1).
This effect provides six different LFO shapes (Figure 2), variable center attenuation, and a rate scaler that
scales LFO rate into the audible range for a new ßavor of amplitude modulation effects.
Final image placement can be monitored on the lower right of the PARAM2 page. The top meter labeled
ÒLÓ shows the left edge of the image while the second meter labeled ÒRÓ shows the right edge. The entire
image will fall between these two marks.
Time
Figure 10-90 Stereo Autopanning
In Figure 10-90, ImageWidth is set to 50%, LFO Shape is set to Sine, Origin is set to 0%, and PanWidth is set
to 100%
Sine
Figure 10-91 LFO Shapes available for AutoPanner
Left
ImageWidth
Origin
PanWidth
Saw+ Saw-
Image
PulseWidth
Pulse Tri
KDFX Reference
KDFX Algorithm Specifications
Right
Expon
10-167