Round End/Keyhole Buttonhole - Kenmore 385.19110 Owner's Manual

Round end/Keyhole buttonhole
Machine setting
_Pattern U or _
_ LED display
_ Foot R: Automatic buttonhole foot
08
®
The sewing sequence is the same as square
buttonhole
H .
Refer to pages 48-50 for sewing
_ Starting point
_ End point
Adjusting the buttonhole width
Press the mode selection key =-_-1to enter the stitch
width adjusting mode.
Press the Down (-) key to decrease buttonhole width.
Press the Up (+) key to increase buttonhole width,
The width of round end buttonhole n can be varied
from 2.5 to 5.5.
_ Narrow buttonhole (2.5mm wide)
_ Wide buttonhole (5.5mm wide)
The width of keyhole buttonhole _ can be varied from
5.0 to 7.0.
_ Narrow buttonhole (5.0mm wide)
_ Wide buttonhole (7.Omm wide)
Refer to page 52 for stitch density adjustment.
II