Section 3. Basic Sewing Straight Stitch Sewing; Starting To Sew; Changing Sewing Direction; Fastening The Seam - Kenmore 385.19110 Owner's Manual

SECTION 3. BASICSEWING
Straight S titchSewing
Machine setting 0_ 0 2 0 3 0 _
_) Pattern:
_) LED display
_) Foot: A:
Zigzag foot
Starting to sew
Raise the presser foot and place the fabric on the
machine.
Lower the needle into the fabric where you want to
start.
Lower the presser foot and start sewing.
NOTE:
To fasten the beginning of the seams, sew several
reverse stitches by pressing the reverse sti
button, or use pattern #03 (Lock-a-Mat
Changing sewing direction
Stop the machine and
fabrics by pressing th
button _.
Raise the presser
Pivot the fabric arc
sewing direction as
Lower the presser foc a new
direction.
_ Up/down needle position button
Fastening the seam
[1] Sew several stitches in reverse by pressing the
reverse stitch button _ to fasten the end of seam,
_) Reverse stitch button
NOTE:
O3
If you use pattern #03 (Lock-a-Matic stitch 1 ),
press the reverse stitch _) button once and the
machine will sew in reverse and stop automatically.
[2] Raise the presser foot and pull the fabric to the
rear.
[3] Draw the threads up and into the thread cutter. The
threads are cut at the proper length for starting the
next seam.
_) Thread cutter
@
01 02 03 04
+€
@
'-'/1
L!
[i_i]
32