Oki CX1145 MFP Network Administration Manual page 46

TopAccess Message
Domain - Invalid Username or Password
Domain - Server not present in Network
Domain - User account is disabled on Server
Domain - User account has expired and cannot be
used for logon
Domain - User account is locked and cannot be
used for logon
Domain - Invalid logon hours for the User
Active Directory Domain - Clock Skew error due to
difference in Time between Server and MFP
Active Directory Domain - Kerberos Ticket has
expired and cannot be used for Authentication
Active Directory Domain - Verification of the Ticket
has failed
Active Directory Domain-The Domain specified
could not be found
Information Failed User Authentication
SNTP Server - Connect Error has occurred
Corrective Action
Please recheck the username and password and
Please confirm if the Caps Lock key is switched on
by accident.
The server is not on network or it could not be
located. Also please check the DNS and DDNS
settings on TopAccess.
Please confirm the User attributes on the server.
This can be verified in -> Active Directory Users
and Computers.
Please change the account expiration date and
retry again. The expiration date can be modified
from Active Directory Users and Computers.
The lockout duration could be specified in account
lockout security policy. If so please retry after the
lockout duration.
The Administrator has set restrictions on the logon
hours. The logon hours can be modified from
Active Directory Users and Computers.
The clocks need to be synchronized. Please con-
firm if SNTP is configured correctly on the equip-
ment.
Please confirm the validity period of the ticket set
by the Kerberos server. Please retry again after the
fresh ticket is issued.
Please verify the username and password and
retry again. If the problem persists please contact
the Administrator.
Please enter the correct domain name in network
settings. If the problem persists please contact the
Administrator for the correct realm name for your
server.
Check DomainName/UserName/Password
The equipment could not connect to the SNTP
Server. Please confirm the SNTP settings.
Troubleshooting Hardware Errors 45