Oki CX1145 MFP Network Administration Manual page 33

2 Troubleshooting
Raw TCP or LPR Printing in a Windows Operating System Environment:
No Check...
1 Are the IP Address proper-
ties correctly set?
2 Is the Raw TCP Printing
correctly set?
3 Is the LPR/LPD Printing cor-
rectly set?
4 Were the proper printer driv-
ers installed?
5 Is the Raw TCP or LPR port
configured with correct IP
address?
6 Can you print to this equip-
ment?
IPP Printing in a Windows Operating System Environment:
No Check...
1 Are the IP Address proper-
ties correctly set?
2 Is the HTTP Server on this
equipment enabled?
3 Is the IPP Printing correctly
set?
4 Were the proper printer driv-
ers installed?
5 Is the IPP port configured
with correct URL?
6 Can you print to this equip-
ment?
32 Troubleshooting Overview
Yes No For Instruction, Go To...
Setup the IP address correctly.
Next Step
Setup the Raw TCP print service
Next Step
correctly.
Setup the LPD print service cor-
Next Step
rectly.
See the Printing Guide to install
Next Step
proper printer drivers.
See the Printing Guide to config-
Next Step
ure the proper port.
Refer to following section to trou-
bleshoot the condition.
End
P.48 "Cannot Print To This
Equipment"
Yes No For Instruction, Go To...
Setup the IP address correctly.
Next Step
Enable the HTTP server in the
Next Step
HTTP Network Service.
Setup the IPP print service cor-
Next Step
rectly.
See the Printing Guide to install
Next Step
proper printer drivers.
See the Printing Guide to config-
Next Step
ure proper port.
Refer to following section to trou-
bleshoot the condition.
End
P.48 "Cannot Print To This
Equipment"