Chapter 8 Remote Scan; Installing Remote Scan Driver; Planning For Installation - Oki CX1145 MFP Scanning Manual

8 Remote Scan

Installing Remote Scan Driver

This section describes how to install the Remote Scan driver.

Planning for Installation

This equipment provides a Remote Scan driver that allows users to operate scanning remotely
from a Windows computer and import the scanned images into a TWAIN-compliant application.
Originals
The Remote Scan driver can connect to this equipment over a TCP/IP network.
System Requirements
The Remote Scan driver is available for following environments:
OS
Windows 2000 Service Pack 4
Windows XP Service Pack 1/Service Pack 2
Windows Vista
Windows Server 2003
Required Software
TWAIN-compliant application
Microsoft Internet Explorer 5.5 Service Pack 2 or later (when IPv4 is used)
Microsoft Internet Explorer 7.0 or later (when IPv6 is used)
Recommended memories
A4/LT color document at 600 dpi: 256 MB
Scanning of the document in the black mode: 256 MB
110

Installing Remote Scan Driver

Connecting over TCP/IP Network
Remotely operate scanning
using Remote Scan driver
Retrieve scanned images
into an application
Windows 2000
Windows XP
Windows Vista
Windows Server 2003