Oki CX1145 MFP Scanning Manual page 121

8 Remote Scan
2
When the process is completed, found devices are listed in the list.
If the process continues for a long time, it is because too many network clients are on the
network. In that case, you can configure the discovery using the [Advanced] button.
P.121 "Configuring Discovery Settings"
3
Select the equipment that you want to connect from the list and
click [OK].
You are connected to the selected device.
Discovering the device manually
1
In the Document Monitor Local Discovery dialog box, click [Manual
Selection].
The Manual Selection dialog box appears.
120 Scanning Remotely Using Remote Scan Driver