Oki CX1145MFP Fax Manual page 28

5
When you enable the "Sender Information" option in the Cover
Sheet tab, display the Sender Information tab and enter the sender
information message to appear the message on the fax cover
sheet.
In the text field in the Sender Information tab, up to 500 characters can be entered.
For instructions on how to set the Sender Information, see the following section.
P.42 "Setting up the Sender Information Properties"
6
Click [OK] to save the settings.
7
Click [OK] or [Print] to send a document.
You can monitor and manage the fax job that is sent from your computer using TopAc-
cess.
P.47 "Managing Fax Jobs using TopAccess"
When you use the N/W-Fax driver to send a fax job, check whether the job has been suc-
cessfully sent, on the "Log - Send" screen in TopAccess. If the relevant fax job is not
included in the Log list, your transmission job may not have been performed. In this
case, search for jobs without the department code in the "Job status - FAX" on the control
panel. Then, select the relevant fax job and press the [SEND] button to resend it.
Faxing from Applications 27