Dell PowerConnect M6220 Configuration Manual page 96

Configuration guide
Hide thumbs Also See for PowerConnect M6220:
Table of Contents

Advertisement

console(config-mac-access-list)#deny any 00:11:22:33:44:55 00:00:00:00:FF:FF log
?
assign-queue
mirror
redirect
<cr>
console(config-mac-access-list)#deny any 00:11:22:33:44:55 00:00:00:00:FF:FF log
Example #6 Configure MAC Access Group
console(config)#interface ethernet 1/g5
console(config-if-1/g5)#mac access-group mac1 ?
in
<cr>
console(config-if-1/g5)#mac access-group mac1 in ?
<1-4294967295>
<cr>
console(config-if-1/g5)#mac access-group mac1 in 6
Example #7: Setup an ACL with Permit Action
console# Config
console(config)#mac access-list extended mac2
console(config-mac-access-list)#permit ?
any
<srcmac>
console(config-mac-access-list)#permit any ?
any
bpdu
<dstmac>
96
Device Security
mplsmcast, mplsucast, netbios, novell, pppoe, rarp).
Configure the Queue Id assignment attribute.
Configure the packet mirroring attribute.
Configure the packet redirection attribute.
Press enter to execute the command.
Enter the direction <in>.
Press enter to execute the command.
Enter the sequence number (greater than 0) to rank
precedence for this interface and direction.
sequence number has higher precedence.
Press enter to execute the command.
Configure a match condition for all the source MAC
addresses in the Source MAC Address field.
Enter a MAC Address.
Configure a match condition for all the destination
MAC addresses in the Destination MAC Address field.
Match on any BPDU destination MAC Address.
Enter a MAC Address.
A lower

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents