Dell PowerConnect M6220 Configuration Manual page 53

----- ----------------
2 4
3 2
1000 2
1001 3
Example #14: Show Group Configuration Summary
Use the show port-aggregator group summary [< GroupId >] command to show the parameters
configured on the aggregator group.
specified, the command shows all the configured parameters for all the Groups.
console#show port-aggregator group summary 2
Group VLANs Uplinks
----- ----- -------
2 4023 1
console#show port-aggregator group summary
Gid VLANs Minimum
Uplinks
--- ----- -------
1 4022 1
2 4023 1
3 4024 1
4 4025 1
Example #15: Show Port Summary
Use the show port-aggregator [group < GroupId >] command to show the member ports in the
<Group Id>
aggregator group.
command shows all the Groups and member ports.
------ -------------
Static Required
Static Required
Static Required
Static Required
<Group Id>
is an optional parameter in the command and, if not
MTU Negotiation Speed
------- ----------- -------
Default Default
MTU Negotiation Speed
------- ----------- -------
Disabled Default
Disabled Default
Disabled Default
Disabled Default
is an optional parameter in the command and, if not specified, the
Duplex
-------
Default Default
Duplex
-------
Default Default
Default Default
Default Default
Default Default
Switching Configuration
53