Port Side Of The Brocade 6505 - Brocade Communications Systems PowerConnect Brocade 6505 Hardware Reference Manual

•
•
•
•
•
•
•
•
•
•
•
•
•

Port side of the Brocade 6505

The port side of the Brocade 6505 includes the system status LED, the console port, the Ethernet
port and accompanying LEDs, the USB port, and the Fibre Channel ports and corresponding port
status LEDs.
Figure 1
Brocade 6505 Hardware Reference Manual
53-1002449-01
An RJ45 10/100 BaseT Ethernet system management port, in conjunction with Brocade
EZSwitchSetup, that supports switch IP address discovery and configuration, eliminating the
need to attach a serial cable to configure the switch IP address and greatly increasing the ease
of use.
One RS-232 serial port with an RJ45 connector for initial switch setup (if not using
EZSwitchSetup) and factory default restoration.
A USB 2.0 port that provides storage for firmware updates, output of the supportSave
command, and storage for configuration uploads and downloads.
One power supply and fan assembly in the base model. There are two fans per assembly. A
second assembly is available for redundancy and hot-swap capability.
One LED (green/amber) per FC port to indicate status.
One LED (green) for system power.
One LED (green/amber) for system status.
Two Ethernet port LEDs (integrated with RJ45) for speed and port activity. (A green LED for port
speed and an amber LED for port activity.)
SEEPROM for switch identification.
Voltage monitor.
Fan monitor.
Temperature monitor.
Real-time clock (RTC) with battery.
shows the port side of the Brocade 6505.
Port side of the Brocade 6505
1
3