Brocade Communications Systems PowerConnect Brocade 6505 Hardware Reference Manual page 44

4
Removing and replacing a power supply and fan assembly
3. Gently push the power supply and fan assembly into the chassis until it is firmly seated.
4. Using the Phillips screwdriver, secure the power supply and fan assembly to the chassis by
5. Plug the power cord into the power supply and fan assembly and power on the unit by
6. Verify that the LED on the new power supply and fan assembly displays a steady green light
7.
32
tightening in the captive screw.
switching the AC power switch to the I symbol.
while the Brocade 6505 is operating. If the LED is not a steady green, ensure that the power
supply is securely installed and seated properly.
Optionally, if using the command line interface (CLI), enter the psShow command at the
command line prompt to display the status. You can also use the fanShow or chassisShow
commands. Power supply and fan assembly status can also be viewed using the Web Tools
application.
Brocade 6505 Hardware Reference Manual
53-1002449-01