Cisco HWIC-4ESW - EtherSwitch HWIC Switch User Manual page 89

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
4.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
mac-address-table static hw-addr [interface]
-
interface id [vlan] vlan-id
Example:
Router(config)# mac-address-table static
0100.5e05.0505 interface 0/3/1 vlan vlan 1
Step 4
end
Example:
Router(config)# end
Removing a Static Address
Follow these steps to remove a static address.
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS:
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
end
enable
configure terminal
no mac-address-table static hw-addr [interface] interface-id [vlan] vlan-id
end
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enters the static MAC address, the interface, and the VLAN
ID of those ports.
Returns to privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
How to Configure EtherSwitch HWICs
89