Advertisement
Quick Links
Connecting 1- and 2-Port Fast Ethernet
High-Speed WAN Interface Cards to the Network
Revised: 04/20/2009, OL-12851-01
This guide describes how to connect Cisco 1- and 2-Port Fast Ethernet high-speed WAN interface cards
(HWICs) to your network. It contains the following sections:
•
•
•
•
Cisco 1- and 2-Port Fast Ethernet HWICs
The Cisco Fast Ethernet HWICs are single-wide interface cards, available as a 1-port HWIC
(HWIC-1FE) and as a 2-port HWIC (HWIC-2FE), that provide Cisco modular and integrated services
routers with additional line-rate Layer 3 routed ports. (See the
Platforms" section on page
Fast Ethernet HWICs Standards
The Fast Ethernet HWICs are designed in accordance with IEEE 802.3 10BASE-T Ethernet and IEEE
802.3u 100BASE-TX Fast Ethernet standards.
The following IEEE standards are also supported:
•
•
•
Fast Ethernet HWICs Restrictions
The following features are not supported on the Fast Ethernet HWICs:
•
Cisco 1- and 2-Port Fast Ethernet HWICs, page 1
Connecting Fast Ethernet HWICs to a Network, page 4
Related Documents, page 4
Obtaining Documentation, Obtaining Support, and Security Guidelines, page 5
2.)
802.1p
802.1u
802.1x
Cisco Interswitch Link (ISL) tagging
"Fast Ethernet HWICs Supported
OL-12851-01
1
Advertisement
Related Manuals for Cisco HWIC-1FE - WAN Interface Card Expansion Module
Summary of Contents for Cisco HWIC-1FE - WAN Interface Card Expansion Module
- Page 1 High-Speed WAN Interface Cards to the Network Revised: 04/20/2009, OL-12851-01 This guide describes how to connect Cisco 1- and 2-Port Fast Ethernet high-speed WAN interface cards (HWICs) to your network. It contains the following sections: Cisco 1- and 2-Port Fast Ethernet HWICs, page 1 •...
- Page 2 For information about HWIC slot locations on each router, see the “Interface Card Slot Locations and Numbering on Cisco Access Routers” section of the Cisco Interface Cards for Cisco Access Routers guide located at: http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/oview_ic.ht...
- Page 3 Connecting 1- and 2-Port Fast Ethernet High-Speed WAN Interface Cards to the Network Cisco 1- and 2-Port Fast Ethernet HWICs Fast Ethernet HWICs LEDs The Fast Ethernet HWICs use three LEDs per port to indicate full- or half-duplex operation, collisions, speed, transmit/receive activity, and link status.
-
Page 4: Related Documents
Related Documents For additional information, see the following documents and resources. Related Topic Document Title Regulatory compliance and safety Cisco Network Modules and Interface Cards Regulatory Compliance and Safety information Information http://www.cisco.com/en/US/docs/routers/access/interfaces/rcsi/IOHrcsi.html Cisco IOS software website and reference Cisco IOS Software documentation http://www.cisco.com/web/psa/products/index.html?c=268438303... -
Page 5: Obtaining Documentation, Obtaining Support, And Security Guidelines
PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. - Page 6 Connecting 1- and 2-Port Fast Ethernet High-Speed WAN Interface Cards to the Network Obtaining Documentation, Obtaining Support, and Security Guidelines OL-12851-01...
Need help?
Do you have a question about the HWIC-1FE - WAN Interface Card Expansion Module and is the answer not in the manual?
Questions and answers