Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - MIGRATION GUIDE 10.3 30-03-2010 Migration Manual page 92

Application icons might not be available after migration
Explanation: If an application object is migrated as an MSI bundle to ZENworks
Migration Utility hangs during migration
Explanation: While migrating AOT applications with more than 500 INI sections to
Unable to migrate the iPrint policy
Explanation: The iPrint policy configured with the
Unable to migrate a Group policy
Explanation: If you configure a Group policy in traditional ZENworks by providing the
A registry action migrated with certain options fails on the managed device
Explanation: If an application with only registry and INI changes and with options such as
92 ZENworks 10 Configuration Management ZENworks Migration Guide
Configuration Management, some of the application icons might not be
available and the following error is displayed in the logs:
ISDEV : error -1024: message string.
This error does not impact the functionality of the bundle in the managed
device and the migration is still successful.
Action: Ignore the error.
ZENworks Configuration Management, the Migration Utility tool hangs.
Action: None.
to ZENworks Configuration Management because
silent installation.
Action: In traditional ZENworks, configure the iPrint policy to use the
client installer and then migrate.
nipp.zip
UNC path of the shared folder that requires authentication, then migrate the
policy to ZENworks Configuration Management by using the Migration
Utility installed on a Windows Vista SP1 device, the migration fails because
the Vista device is unable to access the network folder.
Action: Do the following:
1. Click Start > Run. Specify
2. Right-click
3. Enter
explorer
4. In the Explorer window, click Tools > Map Network Drive to map the
network location.
5. Provide the user credentials, then migrate the policy or application
configured with that path.
Create if exists, Delete, Append if existing otherwise create, or Prepend if
existing otherwise create configured under the distribution options is migrated
as an MSI, the options fail on the managed device.
nipp.exe
system32
, then select Run as administrator.
cmd.exe
at the command prompt to launch the Explorer window.
client installer is not migrated
does not support
nipp.exe
nipp-s.exe
, then click OK.
or