Selecting The Migration Source; Section 4.3, "Selecting The Migration Source - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - MIGRATION GUIDE 10.3 30-03-2010 Migration Manual

4.3 Selecting the Migration Source

To identify and log into your migration source Novell eDirectory tree:
Migration Source
Figure 4-2
1 Fill in the following fields to authenticate to your migration source eDirectory tree:
Tree: This field is not displayed the first time that you access the eDir Login dialog box.
On the second and subsequent logins, any tree that you previously logged into by using this
dialog box is available from the drop-down list.
Each time you use this dialog box, the last tree that you logged into is displayed here.
To add an eDirectory tree that is not listed, select the <New Tree> default option, fill in the
other fields, then click OK. Thereafter, the tree is available in the drop-down list.
Username: Specify the LDAP username.
For example,
cn=readonlyuser,ou=container,o=organization
If this is the first time you have logged into this tree through the Migration utility, nothing is
displayed; otherwise, the last username you used is displayed.
If you select an eDirectory tree in the Tree field, this field is automatically populated with the
username you last used for that tree.
NOTE: To migrate objects, you must be configured in eDirectory as a Trustee of the container
containing those objects with atleast Read and Compare rights. For more information on adding
Trustees, see the ConsoleOne User Guide
Password: Specify the password. This must be entered every time to authenticate.
(http://www.novell.com/documentation/consol13).
Migrating to ZENworks Configuration Management
.
39