Starting The Zenworks Migration Utility - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - MIGRATION GUIDE 10.3 30-03-2010 Migration Manual

You can use the ZENworks Migration Utility as a modeling tool to help in your planning. For
more information, see
7 Continue with Section 4.2, "Starting the ZENworks Migration Utility," on page

4.2 Starting the ZENworks Migration Utility

The ZENworks Migration Utility can run on the following devices:
Windows* Server 2003 SP1
Windows 2000 SP4 workstation
Windows XP SP2
Windows XP SP3
Windows Vista*
Windows Vista SP1
Windows Server 2008
Also, Microsoft .NET 2.0 or later is required.
The ZENworks Migration Utility is not backward compatible. Whenever you upgrade the
ZENworks server, copy and install the latest version of the Migration Utility from the ZENworks
server. For more information, see
To start the ZENworks Migration Utility:
1 On a supported Windows device, click Start > Programs > Novell ZENworks > ZENworks
Configuration Management Migration Utility > Launch.
2 (Conditional) By default, What's New window appears for the first time. If you do not want the
window to appear every time you start the utility, select the Do not show this message again
option.
3 Click OK.
Section 3.4, "Planning Your Migration," on page
Step 5 on page 36.
27.
Migrating to ZENworks Configuration Management
37.
37