Section 4.5, "Migrating Applications; Section 4.6, "Migrating Images; Section 4.7, "Migrating Policies; Section 4.9, "Migrating Workstations - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - MIGRATION GUIDE 10.3 30-03-2010 Migration Manual

Each time you use this dialog box, the last zone that you logged into is displayed here.
To add a Management Zone that is not listed, select the <New Zone> default option, fill in the
other fields, then click OK. Thereafter, the zone is available in the drop-down list.
Username: Specify the username for the zone. Administrator is normally used.
For example, if the administrator is an LDAP user named admin1@tree1 who has been granted
Super Administrator rights through ZENworks Control Center, specify the username based on
the following criteria:
If there is no other administrator created in ZENworks Control Center with the same name
as admin1, you can specify the username as admin1 or admin1@tree1.
If there are other administrators created in ZENworks Control Center with the same name,
such as admin1@tree2, admin1@tree3, or admin1, you must specify the complete
username: admin1@tree1.
If this is the first time you have logged into this zone through the Migration utility, nothing is
displayed; otherwise, the last username you used is displayed.
If you select a Management Zone in the Zone field, this field is automatically populated with
the username you last used in the migration tool to log into that zone.
Password: Specify the password. This must be entered every time to authenticate.
Server: For the server hosting the Management Zone database, specify either its DNS name or
IP address. This field is automatically populated when you select a Management Zone in the
Zone field.
Web Service Port: Specify the Web service port. The default port of 443 is displayed. This
field is automatically populated when you select a Management Zone in the Zone field.
However, if the port configured on the server is different from the default port, ensure that you
specify the port as configured on the server.
Use SSL: Select whether you are using SSL.
File Upload HTTP Port: Specify the HTTP port. The default port of 80 is displayed. This
field is automatically populated when you select a Management Zone in the Zone field.
However, if the port configured on the server is different from the default port, ensure that you
specify the port as configured on the server.
2 Click OK.
The Destination Zone panel uses teal-colored text to show anything that was previously
migrated, as does the Migration History tab. It also uses black text to show anything originally
created in ZENworks Control Center and never migrated. If you previously used the ZENworks
Migration Utility on the current workstation to model your migration, items not yet migrated
are displayed as dimmed.
3 To select items to migrate, continue with the appropriate sections:
1. Section 4.5, "Migrating Applications," on page 42
2. Section 4.6, "Migrating Images," on page 48
3. Section 4.7, "Migrating Policies," on page 52
4. Section 4.9, "Migrating Workstations," on page 57
5. Section 4.10, "Migrating Associations," on page 61
The above list represents the suggested migration order because of possible dependencies.
However, you can migrate in any order, including any subsets.
Migrating to ZENworks Configuration Management 41