Migrating To Zenworks Configuration Management; Prerequisites - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - MIGRATION GUIDE 10.3 30-03-2010 Migration Manual

Migrating to ZENworks
4
Configuration Management
Do the following tasks in the order listed to migrate your traditional ZENworks
Configuration Management:
1. Section 4.1, "Prerequisites," on page 35
2. Section 4.2, "Starting the ZENworks Migration Utility," on page 37
3. Section 4.3, "Selecting the Migration Source," on page 39
4. Section 4.4, "Selecting the Migration Destination," on page 40
5. Section 4.5, "Migrating Applications," on page 42
6. Section 4.6, "Migrating Images," on page 48
7. Section 4.7, "Migrating Policies," on page 52
8. Section 4.8, "Migrating Management Zone Settings," on page 55
9. Section 4.9, "Migrating Workstations," on page 57
10. Section 4.10, "Migrating Associations," on page 61
11. Section 4.11, "Setting Up Migrated Workstations to be Managed," on page 66
12. Section 4.12, "Make an Image of the Migrated Workstations," on page 66
13. Section 4.13, "Managing Your Traditional ZENworks Installation," on page 67

4.1 Prerequisites

To fulfill the prerequisites for migrating to Configuration Management:
1 Make sure that the version of ZENworks you are migrating from is one of the following:
ZENworks for Desktops 4.0.1
ZENworks Desktop Management 6.5
ZENworks 7.x Desktop Management
IMPORTANT: For your current installation of a traditional ZENworks system, you must have
®
a Novell eDirectory
eDirectory objects listed in the tree. The ZENworks Migration Utility cannot be used to create
new objects or attributes in Configuration Management that do not exist in your traditional
version of ZENworks, but you can use the utility to create new folders in Configuration
Management.
2 Install the Configuration Management software to at least one Primary Server with the
ZENworks Configuration Management database in order to establish the Management Zone
and to provide the target ZENworks database for migrating the eDirectory data.
For more information, see the
tree with the ZENworks schema installed and have ZENworks
TM
ZENworks 10 Configuration Management Installation
®

Migrating to ZENworks Configuration Management

4
software to
Guide.
35