Incremental Migration; Migration Order - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - MIGRATION GUIDE 10.3 30-03-2010 Migration Manual

in a network segment, if you have ZENworks Linux Management running with a referral list
configured, you need to disable the Proxy DHCP service for Linux Management. This allows
the Configuration Management referral list to be used by all PXE devices.
A server referral list allows you to ensure that all devices contact their home zone or tree for
preboot work assignments. The list should contain the IP address of an imaging server in each
known Management Zone or traditional ZENworks system's tree. When a device requests
preboot work from a server, the server first determines if the device belongs to the same zone or
tree as the server. If it does not, that server refers the request to each server in its server referral
list until it finds the device's home zone or tree. The device is then instructed to send all future
requests to the correct
If two server referral lists are active, do the following:
1 Install ZENworks Configuration Management.
For instructions, see the
2 Configure a server referral list in your Configuration Management system.
3 Disable the Proxy DHCP service in your Linux Management system.

3.4.4 Incremental Migration

The migration screen's design provides granularity that allows you to migrate one item or thousands
of items at a time. Therefore, you can migrate any number of items in a session and you can use as
many sessions as you need.
Because traditional ZENworks and Configuration Management can run concurrently, but are not
interoperable, you can migrate eDirectory objects incrementally, such as by department or
geographical region.
When migrating, the ZENworks Migration Utility preserves GUIDs and version numbers, but cache
is not used. Therefore, we recommend when you migrate Workstation objects that you migrate all
eDirectory associations related to those workstations before you register the workstations in
Configuration Management.

3.4.5 Migration Order

The following list represents what can be migrated and shows the suggested migration order.
However, you can migrate in any order, including any subsets of these migration types:
1. Applications
2. Images
3. Policies
4. Zone Settings
5. Workstations
6. Associations
This order is recommended because of possible dependencies, such as associations that require their
applications and associated objects to already exist in order to re-create those associations in
Configuration Management.
30 ZENworks 10 Configuration Management ZENworks Migration Guide
daemon.
novell-proxydhcp
ZENworks 10 Configuration Management Installation Guide.