Table of Contents
Advertisement
You can also add additional user accounts or change the user authentication method in
the installed system. For detailed information about user management, see
"User Management"
Along with the selected user administration method, you can use Kerberos authentication.
This is essential for integrating your SUSE Linux Enterprise to an Active Directory
domain, which is described in
Directory"
(page 705). To use Kerberos authentication, select Set Up Kerberos Authen-
tication.
3.11.8 Clean Up
This step does not require any user interaction. The installation program launches the
SuSEconfig script to write the system configuration. Depending on the CPU and the
amount of memory, this process can take some time.
3.11.9 Release Notes
After completing the user authentication setup, YaST displays the release notes. Reading
them is advised because they contain important up-to-date information that was not
available when the manuals were printed. If you tested the Internet connection, read
the most recent version of the release notes, as fetched from SUSE Linux Enterprise's
servers. Use Miscellaneous > Release Notes to view the release notes after installation.
3.11.10 Hardware Configuration
At the end of the installation, YaST opens a dialog for the configuration of the graphics
card and other hardware components connected to the system. Click the individual
components to start the hardware configuration. For the most part, YaST detects and
configures the devices automatically.
TIP: IBM System z: Hardware Configuration
On the IBM System z, there is no display that would be supported by XFree.
Accordingly, you do not find a Graphics Cards entry on these systems.
(page 167).
Section 37.6, "Samba Server in the Network with Active
Section 8.9.1,
Installation with YaST
39
Advertisement
Table of Contents
Troubleshooting
