Configuring Gender Attribute Maps - Novell ACCESS MANAGER 3.1 SP2 - IDENTITY SERVER GUIDE 2010 Manual

5 Click Finish.
6 On the LDAP Attribute Mapping page, click OK.
7 Update the Identity Server.

13.6.6 Configuring Gender Attribute Maps

You can map the LDAP attribute name and values to the Liberty profile values for the Gender
attribute. You can use gender to differentiate between people with the same name, especially in
countries where national ID numbers cannot be collected. This is a Personal Profile attribute.
1 In the Administration Console, click Devices > Identity Servers > Edit > Liberty > LDAP
Attribute Mapping > New > Gender.
2 Configure the following fields:
Name: The name you want to give the map.
Description: A description of the map.
Access Rights: A drop-down menu that provide the broadest control for the page. If you set
this to Read/Write, you can specify rights for individual data items.
In order for user provisioning to succeed, you must select Read/Write from the Access Rights
drop-down menu for any maps that use an attribute during user provisioning.
User Stores: The user store that a map applies to. If a user logs into a user store that is not in
the map's user store list, that map is not used to read or write attributes for that user.
3 In the LDAP Attribute Name field, type the LDAP attribute name that you want to map to the
Liberty element Gender.
4 In the LDAP Attribute Value fields, type the predefined LDAP attribute values that you want to
map to the Gender values.
These are the values that you want to store in the LDAP attribute for each given Liberty
attribute value. The LDAP attribute map then maps the actual Liberty URI value, back and
forth, to this supplied value.
314 Novell Access Manager 3.1 SP2 Identity Server Guide