Novell ACCESS MANAGER 3.1 SP2 - IDENTITY SERVER GUIDE 2010 Manual page 118

The following classes are predefined for Access Manager:
Introductions: When the class is configured, it allows users to select an identity provider from
a list of introducable identity providers. For information on how to configure and use this class,
see Section 7.2.3, "Configuring the Introductions Class," on page
Name/Password - Basic: Basic authentication over HTTP using a standard login pop-up page
provided by the Web browser.
Name/Password - Form: Form-based authentication over HTTP or HTTPS.
Secure Name/Password - Basic: Basic authentication over HTTPS using a standard login
page provided by the Web browser.
Secure Name/Password - Form: Form-based authentication over HTTPS.
Trust Levels: When this class is configured, it defines authentication levels for classes that can
be used in authentication requests. For more information on how to configure and use this
class, see
2 To delete a class, select the class, then click Delete.
You cannot delete a class if a method is using it.
For information on how to create a name/password class, see the following sections:
Section 3.2.1, "Creating Basic or Form-Based Authentication Classes," on page

Section 3.2.2, "Specifying Common Class Properties," on page 120

Some classes require additional configuration to enable their use for authentication. See the
following sections:
"Configuring for RADIUS Authentication" on page 139

 "Configuring Mutual SSL (X.509) Authentication" on page 140
"Creating an ORed Credential Class" on page 145

"Configuring for OpenID Authentication" on page 147

 "Configuring Password Retrieval" on page 148
"Configuring Access Manager for NESCM" on page 149

"Configuring for Kerberos Authentication" on page 159

118 Novell Access Manager 3.1 SP2 Identity Server Guide
Section 7.2.4, "Configuring the Trust Levels Class," on page
188.
189.
119.