Configuring The Saml 2.0 Authentication Response - Novell ACCESS MANAGER 3.1 SP2 - IDENTITY SERVER GUIDE 2010 Manual

If the request from the service provider does not specify a response binding, you need to
specify a binding method to use in the response. Select Artifact to provide an increased level of
security by using a back-channel means of communication between the two servers. Select Post
to use HTTP redirection for the communication channel between the two servers. If you select
Post, you might want to require the signing of the authentication requests. See
"Configuring the General Identity Provider Options," on page
3 Specify the identity formats that the Identity Server can send in its response. Select the Use box
to choose one or more of the following:
 Persistent Identifier Format: Specifies that a persistent identifier, which is written to the
directory and remains intact between sessions, can be sent.
 Transient Identifier Format: Specifies that a transient identifier, which expires between
sessions, can be sent.
If the request from the service provider requests a format that is not enabled, the user cannot
authenticate.
4 Use the Default button to specify whether a persistent or transient identifier is sent when the
request from the service provider does not specify a format.
5 To specify that this Identity Server must authenticate the user, disable the Use proxied requests
option. When the option is disabled and the Identity Server cannot authenticate the user, the
user is denied access.
When this option is enabled, the Identity Server checks to see if other identity providers can
satisfy the request. If one or more can, the user is allowed to select which identity provider
performs the authentication. If a proxied identity provider performs the authentication, it sends
the response to the Identity Server. The Identity Server then sends the response to the service
provider.
6 Enable the Provide Discovery Services option if you want to allow the service provider to query
the Identity Server for a list of its Web Services. For example, when the option is enabled, the
service provider can determine whether the Web Services Framework is enabled and which
Web Service Provider profiles are enabled.
7 Click OK twice, then update the Identity Server.

7.9.2 Configuring the SAML 2.0 Authentication Response

After you create a trusted service provider, you can configure how your Identity Server responds to
authentication requests from the service provider.
1 In the Administration Console, click Devices > Identity Servers > Edit > SAML 2.0 > [Service
Provider] > Authentication Response.
186.
Configuring SAML and Liberty Trusted Providers 213
Section 7.2.1,