Novell ACCESS MANAGER 3.1 SP2 - IDENTITY SERVER GUIDE 2010 Manual page 17

 Organizational and contact information for the server, which is published in the metadata of the
Liberty and SAML protocols.
The LDAP directories (user stores) used to authenticate users, and the trusted root for secure

communication between the Identity Server and the user store.
To create an Identity Server configuration:
1 In the Administration Console, click Devices > Identity Servers.
2 Select the Identity Server's check box, then click New Cluster.
Selecting the server is one way to assign it to the cluster configuration.
3 In the New Cluster dialog box, specify a name for the cluster configuration.
If you did not select the server in the previous step, you can now select the server or servers that
you want to assign to this configuration.
For more information about assigning servers to a configuration, see
an Identity Server to a Cluster Configuration," on page
4 Click OK.
Section 1.1.2, "Assigning
21.
Configuring an Identity Server 17