Creating A Contract For The Smart Card - Novell ACCESS MANAGER 3.1 SP2 - IDENTITY SERVER GUIDE 2010 Manual

The system displays a green check mark if the connection is valid.
11 Set up a search context.
12 Click Finish to save the information.
13 Continue with

4.6.3 Creating a Contract for the Smart Card

You need to create a contract that uses the NESCM method. To do this, you need to first create an
NMAS class, then a method that uses that class. The last task is to create a contract that uses the
method. The following sections describe these tasks:
"Creating an NMAS Class for NESCM" on page 152

"Creating a Method to Use the NMAS Class" on page 153

 "Creating an Authentication Contract to Use the Method" on page 154
Creating an NMAS Class for NESCM
When you create a class, you can specify values for properties. In the following steps, you specify a
property value that determines the sequence of login prompts that the user receives when
authenticating with a smart card.
1 In the Administration Console, click Devices > Identity Servers > Edit > Local > Classes >
New.
2 Specify a display name for the class (for example,
3 For the Java class, select NMASAuthClass from the selection list.
4 Click Next.
5 On the Specify Properties page, click New.
152 Novell Access Manager 3.1 SP2 Identity Server Guide
Section 4.6.3, "Creating a Contract for the Smart Card," on page
).
Class-NMAS-NESCM
152.