Creating An Image Set - Novell ACCESS MANAGER 3.1 SP2 - IDENTITY SERVER GUIDE 2010 Manual

Locale: From the drop-down menu, select the language for the card or select All Locales if the
card can be used with all languages.
4 Click OK.
5 If you did not specify All Locales for the Locale, continue with
Set," on page 181.

6.6 Creating an Image Set

You can create card images for specific locales as well as a default image for all locales. The images
need to be placed in an image set that allows the browser to display the image associated with the
requested locale. If the browser requests a locale for which you have not defined an image, the All
Locales image is displayed. If an All Locales image is not available, the browser displays the Image
not Available card.
1 In the Administration Console, click Devices > Identity Servers > Shared Settings >
Authentication Card Images.
2 Click the card image.
3 To add an image to the set, click New, then fill in the following fields:
File: Click Browse, then browse to the location of the file.
Locale: Select the locale from the drop-down menu.
4 Click OK.
Section 6.6, "Creating an Image
Defining Shared Settings 181