Template Attributes; Configuring Authentication Cards - Novell ACCESS MANAGER 3.1 SP2 - IDENTITY SERVER GUIDE 2010 Manual

Allow Users to Back a Managed Card Using a Personal Card: When this option is
selected, the user is presented with the option to back the managed card with a personal card.
When this option is not selected, the option to back the managed card with a personal card is
removed from the user interface.
 When a managed card is backed by a personal card, the user enters the required credentials
once, and thereafter only the card is needed for authentication.
 When a managed card is not backed by a personal card, the user must always enter the
required credentials on authentication.
3 Select one of the following actions:
 To configure the attributes, continue with
page 245.
 To save your changes, click OK twice, then update the Identity Server.

8.8.2 Template Attributes

Use the Attribute page to select the claims that are available on the managed card.
1 In the Administration Console, click Devices > Identity Servers > Edit > CardSpace >
Managed Card Templates > [Name of Card] > Attributes.
2 Configure the following fields:
Attribute set: From the list of available sets, select the default CardSpace set or the set that
you have created for CardSpace claims. To create a new attribute set, select New Attribute Set.
If the set you have created for CardSpace is not listed, you need to configure the STS to use the
set. Click Identity Servers > Edit > STS > Attribute Sets to manage the claims that are available.
Selected claims: From the list of Available claims, select the attributes for the managed card
and move them to the list of Selected claims.
3 Click OK if you are modifying a template, or click Finish if you are creating a template.
4 Click OK, then update the Identity Server.

8.9 Configuring Authentication Cards

Use the Authentication Card page to manage the card assigned to a CardSpace authentication card.
1 In the Administration Console, click Devices > Identity Servers > Edit > CardSpace >
Authentication Card.
2 Configure the following fields:
ID: (Optional) Specify an alphanumeric value that identifies the card. If you need to reference
this card outside of the user interface, you must specify a value here. If you do not assign a
value, the Identity Server creates one for its internal use.
Text: Specify the text that is displayed on the card to the user.
Image: Specify the image to be displayed on the card. Select the image from the drop-down
list. To add an image to the list, click Select local image.
Show Card: Determine whether the card is shown to the user, which allows the user to select
and use the card for authentication. If this option is not selected, the card is only used when a
service provider requests the card.
Section 8.8.2, "Template Attributes," on
Configuring CardSpace 245