Configuring The Identity Server As A Relying Party; Defining An Authentication Card And Profile - Novell ACCESS MANAGER 3.1 SP2 - IDENTITY SERVER GUIDE 2010 Manual

6 On the New Card page, click Create Card.
7 Click Open.
CardSpace opens.
8 Click Install and Exit.
The managed card backed by a personal card is installed.
9 Log out and close the browser.
10 In the browser, enter the base URL of the Identity Server acting as the relying party.
11 Select the CardSpace card.
12 In your card selector, select the managed card that is backed by a personal card, then click
Send.
13 When prompted, enter the username and password, and log in.
On subsequent logins, you can use the card to log in without entering any credentials.
14 Click the Federation tab.
It displays the name of the card that you used to log in with and allows you to break the
federation with the personal card. When you break the federation, you must supply credentials
to log n.
For information on using this card with resources protected by the Access Gateway, see
Section 8.6, "Using CardSpace Cards for Authentication to Access Gateway Protected
Resources," on page 242
8.4 Configuring the Identity Server as a Relying
Party
When the Identity Server is acting as the relying party, you need to define how you want the user to
authenticate. This involves defining who can issue the credentials and what credentials are required.
 Section 8.4.1, "Defining an Authentication Card and Profile," on page 235
Section 8.4.2, "Defining a Trusted Provider," on page 237

Section 8.4.3, "Cleaning Up Identities," on page 239

 Section 8.4.4, "Defederating after User Portal Login," on page 239
For a basic setup, see "Configuring the Relying Party to Trust an Identity Provider" on page

8.4.1 Defining an Authentication Card and Profile

The authentication card defines the visual aspects of the card. An authentication card profile defines
the parameters for accessing CardSpace. Multiple profiles can be created for the authentication card,
and the user can select which profile to use for authentication.
1 In the Administration Console, click Devices > Identity Servers > Edit > CardSpace.
2 Click Authentication Card, then fill in the following fields:
ID: (Optional) Specify an alphanumeric value that identifies the card. If you need to reference
this card outside of the user interface, you need to specify a value here. If you do not assign a
value, the Identity Server creates one for its internal use.
Text: Specify the text that is displayed as the card name to the user, such as CardSpace.
232.
Configuring CardSpace 235