Novell ACCESS MANAGER 3.1 SP2 - IDENTITY SERVER GUIDE 2010 Manual page 151

2 On the Create User Store page, fill the following fields:
Name: A display name for the eDirectory replica (for example,
Admin Name: The distinguished name of the admin user of the directory. Administrator-level
rights are required for setting up a user store.
Admin Password and Confirm Password: The password for the admin user and the
confirmation for the password.
Directory Type: Select eDirectory.
3 In the Server replica section, click New, and fill the following fields:
Name: The display name for the LDAP directory server (for example,
IP Address: The IP address of the LDAP directory server. The port is set automatically to the
standard LDAP ports.
4 Click Use secure LDAP connections. You must enable SSL between the user store and the
Identity Server. The port changes to 636, which is the secure LDAP port.
5 Click Auto import trusted root.
6 Click OK to confirm the import.
7 Select the Root CA Certificate to trust any certificate signed by that certificate authority.
8 Specify an alias, then click OK.
An alias is a name you use to identify the certificate used by Access Manager.
9 Click Close, then click OK.
10 Under Server Replicas, verify the Validation Status.
nescm_replica
Configuring Advanced Local Authentication Procedures 151
).
).
nescm_server