Akuvox E13 Installation Manual

Hide thumbs

page of 17

/ 17
Bookmarks

Quick Links

Download this manual

E13

Installation Guide

Unpacking

Before using the device, check the device model and ensure that the shipped box includes the following items:

E13 X 1

Rubber plug A

X 1

Wiring cover X 1

Mounting bracket X 1

Rubber Plug B X 1

11-PIN cable X 1

M3x6 Torx head screw X 2

Diode X 1

M2x5 crosshead screw X 4

6#-32x20 Phillips machine screw X 2

Cable tie X 1

Torx wrench X 1

Need help?

Do you have a question about the E13 and is the answer not in the manual?

Questions and answers

Summary of Contents for Akuvox E13

Page 1 Installation Guide Unpacking Before using the device, check the device model and ensure that the shipped box includes the following items: E13 X 1 Rubber plug A Wiring cover X 1 Mounting bracket X 1 Rubber Plug B X 1...
Page 2 Wall-mounting Accessories (Please find in On-Wall Installation Kit box): Wall-mounting box ST4x20 crosshead screw X 4 ST3x8 corsshead screw X4 M4x20 crosshead screw X 4 Plastic wall anchor X 4 Flush-mounting Accessories (Please find in In-Wall Installation Kit box): Flush-mounting box...
Page 3 Product Overview Photosensitive Sensor Microphone Camera Infrared LED Card Reader Call Button Speaker...
Page 4 Before You Start Tools needed (not included in shipped box) Cat Ethernet Cable  Crosshead Screwdriver  Electric Drill  Voltage and Current Specifications It is suggested that use PoE or power adapter to power on device. 12VDC 1A  AWG Sizes and Properties Table Please follow the properly wire data to install device: Power Supply...
Page 5 Requirements 1. Place the device away from sunlight and light sources to prevent potential damage. 2. Do not place the device in the high-temperature, and humid environments or in surroundings impacted by magnetic field. 3. Install the device on the flat surface securely to avoid personal injuries and property loss caused by device’s falling. 4.
Page 6 4. Use wet cloth clean device surface softly, and then wipe the surface with dry cloth for cleaning the device. 5. If there is abnormal situation of the device, including uncommon sound and smell, please power off the device and contact Akuvox...
Page 7 Wiring Interface To protect the device from potential damage caused by over-voltage, it is recommended to wire a diode into the circuit. Connect the anode of the diode to the negative cable of the lock, and connect the cathode of the diode to the positive cable of the lock.
Page 8 Installation Step1: Bracket/Box Installation 1. Wall Mounting Without embedded box in the wall ● Install the wall-mounting box with the arrow pointing upwards, Remove the wall-mounting ensuring the opening aligns with Insert four plastic wall box, use a 6mm hand drill to the cable outlet on the wall.
Page 9 With embedded box (86x86 mm) in the wall. Use four ST3x8 crosshead screws Use two M4x20 crosshead screws to fix the wall-mounting bracket to install the wall-mounting box on wall-mounting box. with the arrow pointing upwards. Ensure the screws are tightened, and the wall-mounting box and bracket are fixed.
Page 10 2. Flush Mounting (with American standard singled-gang box) Align the screw holes of the mounting Use two #6-32x20 Phillips machine bracket with the screw holes of the in-wall screws to fix the mounting bracket, box, ensuring the bracket is positioned with ensuring the bracket is closely against the arrow pointing upward.
Page 11 Step2: Main Unit Installation 1. Wall Mounting Select the appropriate rubber plug to fix the  cables, and place the selected rubber plug in Take out the main unit, connect the the designated position. Ethernet cable and wires to the Insert the wires and Ethernet cable into the ...
Page 12 2. Flush Mounting Select the appropriate rubber plug to fix the  cables, and place the selected rubber plug in Take out the main unit, connect the the designated position. Ethernet cable and wires to the Insert the wires and Ethernet cable into the ...
Page 13 Step3: Device Mounting Check if the main unit is flush with the wall. Ensure Slide the main unit downwards, ensuring  all connections are secure and the device powers on the bracket's tabs fit into the slots at the properly, then the installation is complete. bottom of the device.
Page 14 Always on Normal status Flashing Calling/ Receiving a call Flashing Offline Purple Always on Talking on a call Red & Blue Flashing Emergency alarm Note: For more LED settings, please check in Device > LED Setting of E13 Web UI.
Page 15 Application Network Topology (third party) SIP Video Phone Indoor Monitor Network Video Recorder (third party)
Page 16 1. Akuvox warranty does not cover intentional mechanical damage or destruction caused by improper installation. 2. Do not attempt to modify, alternate, maintain, or repair device by yourself. Akuvox warranty does not apply to damages caused by anyone who is not representative of Akuvox or an Akuvox authorized service provider.
Page 17 Notice Information Information contained in this document is believed to be accurate and reliable at the time of printing. This document is subject to change without notice, any update to this document can be viewed on Akuvox’ s website: https://www.akuvox.com ©...

This manual is also suitable for:

E13s