Verifying The Computer Installation; Adding A Linksys One Voice Gateway To The Network; Installing A Vga2000 Voice Gateway - Linksys VGA2100 - One Analog Voice Gateway 3 Line Administration Manual

Verifying the Computer Installation

1. Once the computer is connected to the Services Router or phone, make sure it has
Internet access by opening a Web browser and verifying that you can connect to
external Web sites.
2. If you cannot connect to the Internet, open the Network Connections window for your
computer operating system and verify that only one LAN connection is enabled. If there
are multiple LAN connections, disable all but one.
3. If you are using the default DHCP settings for the Services Router, make sure each PC is
set to obtain an IP address (or TCP/IP) address automatically. For details, see the
documentation for your computer operating system.

Adding a Linksys One Voice Gateway to the Network

Linksys One Analog Voice Gateways provide a means of connecting to legacy analog FAX
machines or phones. They also provide a connection to the public telephone network for
emergency services calls.
These procedures help you install the following voice gateways on your network:

• Installing a VGA2000 Voice Gateway

• Installing a VGA2100 Voice Gateway
• Installing a VGA2200 Voice Gateway
• Normal Operation for the Linksys One Voice Gateways
Installing a VGA2000 Voice Gateway
Here's how to install a VGA2000 Voice Gateway on your Linksys One network:
1. Unpack the VGA2000 Voice Gateway and verify that the box contains the following
components:
• VGA2000 Voice Gateway
• Six- foot Category 5e RJ-45 Ethernet cable
64
Linksys One Communications Solution
VGA2000 Voice Gateway
Phone
cable
Chapter 4: Installation
Adding a Linksys One Voice Gateway to the Network
4
Ethernet
cable