Advertisement
Quick Links
TITAN SERIES 90" LAT TOWER
POWER RACK ATTACHMENT
90TSPRLATTTWR, 90TSPRLATTTWR-TITANLOGOSTB,
90TSPRLATTTWR-STBLGST_TS
401648, 401761, 401766
Operator's Manual
Read the Operator's Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!
Advertisement
Related Manuals for Titan Fitness TITAN 90TSPRLATTTWR
Summary of Contents for Titan Fitness TITAN 90TSPRLATTTWR
- Page 1 TITAN SERIES 90" LAT TOWER POWER RACK ATTACHMENT 90TSPRLATTTWR, 90TSPRLATTTWR-TITANLOGOSTB, 90TSPRLATTTWR-STBLGST_TS 401648, 401761, 401766 Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious follow without exception. Your life and the lives of others depend on it!
- Page 2 NOTE FROM TITAN NOTE: The Crossmember Nameplate or the Crossmemeber Stabilizer is required to install the TITAN Series Lat Tower to your power rack. ASSEMBLY PARTS DIAGRAM / EXPLODED VIEW...
- Page 3 DESCRIPTION DESCRIPTION LOWER FIXING FRAME (14) CABLE Φ5*3380 LINK Φ5*230 UPPER FIXING FRAME (15) RUBBER BUMPER REAR UPRIGHT FRAME (17) Φ55*Φ25*25 CONNECTING FRAME (20) HOOK Φ8*80 FLAT WASHER WEIGHT PLATE HOLDER (23) Φ26*Φ44*4 GUIDE ROD (25) SPRING WASHER Φ24 MOVABLE PULLEY FRAME (27) FLAT NUT M24 PEDAL FRAME...
- Page 5 ASSEMBLY INSTRUCTIONS Step 1 Connect the Lower Fixing Frame (1), Rear Upright Frame (3) and Connecting Frame (4) with the Power Rack, using Flat Washer Φ26*Φ44*4(23), Spring Washer Φ24 (25), M24 Flat Nut (27) and Hex Bolt M24*120 (32).
- Page 6 Step 2 Pass the Rubber Bumper (17) and Weight Plate Holder (5) through the Guide Rod (6), then Insert the Guide Rod(6) into the Low Fixing Frame (1),fixing by Flat Washer Φ10.5*Φ30*2.5 (22),Spring Washer Φ10 (24) and Hex Bolt M10*30 (28), then adjust the machine and tighten all bolts.
- Page 7 Step 3 Insert the other side of the Guide Rod (6) into the hole on the Upper Fixing Frame (2), then Fixing by Flat Washer Φ10.5*Φ30*2.5 (22), Spring Washer Φ10 (24) and Hex Bolt M10*30 (28). Connect the Rear Upright Frame (3) with the Upper Fixing Frame (2), using Flat Washer Φ26*Φ44*4 (23), Spring Washer Φ24 (25) and Hex Bolt M24*120 (32).
- Page 8 Step 4 Connect the Pedal Frame (8) on the Connecting Frame (4), using Flat Washer Φ11*Φ20*2 (21), Nut M10 (26) and Hex Bolt M10*95 (31).
- Page 9 Step 5 Remove the Pulley(A,B,C) on the Upper Fixing Frame(2), insert the cable (14) from Pulley A, via the upper fixing frame(2) and out from the hole of Pulley B, through the pulley C Bracket ,then reinstall the pulley A,B,C. Remove the Pulley(F&G), Through one side of cable (14) into the Pulley bracket on the Connecting Frame (4) and Lower Fixing frame (1), then reinstall the pulley F&G.
- Page 10 PARTS DIAGRAM / EXPLODED VIEW...
- Page 11 DESCRIPTION DESCRIPTION SLIDING SLEEVE LOWER FIXING FRAME (18) Φ35.50*Φ26*39 UPPER FIXING FRAME (19) END CAP Φ48*3 REAR UPRIGHT FRAME (20) HOOK Φ8*80 CONNECTING FRAME (21) 1&2 FLAT WASHER Φ11*Φ20*2 WEIGHT PLATE HOLDER (22) FLAT WASHER Φ10.5*Φ30*2.5 GUIDE ROD (23) FLAT WASHER Φ26*Φ44*4 MOVABLE PULLEY FRAME (24) SPRING WASHER Φ10...
- Page 12 STBLGST_TS - ASSEMBLY/EXPLODED VIEW DESCRIPTION CONNECTING FRAME FLAT WASHER Φ26*Φ44*4 SPRING WASHER Φ24 FLAT NUT M24 HEX BOLT M24*120...
- Page 13 STBLGST_TS - ASSEMBLY INSTRUCTIONS STEP 1 Assemble the Connecting Frame (1) with the Power Rack, using Flat Washer Φ26*Φ44*4(2), Spring Washer Φ24 (3), M24 Flat Nut (4) and Hex Bolt M24*120 (5).
- Page 14 TITANLOGOSTBv2 - EXPLODED VIEW DESCRIPTION LOGO FRAME FLAT WASHER Φ26*Φ44*4 SPRING WASHER Φ24 NUT M24 HEX BOLT M24*120...
- Page 15 TITANLOGOSTBv2 - ASSEMBLY INSTRUCTIONS STEP 1 1. Remove the Pull Up Bar from the Power Rack. 2. Connect the Stabilizer with Titan logo gusset (1) and the Upright Frame (6) for Power Rack, using Flat Washer Φ26*Φ44*4(2), Spring Washer Φ24 (3), M24 Flat Nut (4) and Hex Bolt M24*120 (5).
- Page 16 ADDITIONAL INFORMATION Guide Rod Maintenance Frequency: Clean monthly for regular use, more often for heavy use. Supplies Needed: · 2 Lint-Free Cloths · Degreaser Spray Cleaner (e.g., Simple Green) · Silicone Lubricant Spray (avoid oil-based lubricants like original WD-40) Directions: 1.
- Page 17 NEED HELP? CONTACT US FIRST. 1-888-410-1503 info@titan.fitness www.titan.fitness © 2024 Titan Brands...
Need help?
Do you have a question about the TITAN 90TSPRLATTTWR and is the answer not in the manual?
Questions and answers