Red Hat DIRECTORY SERVER 8.1 Command Reference Manual page 97

Replication Attributes under cn=replica, cn="suffixDN", cn=mapping tree, cn=config
Parameter
Valid Range
Default Value
Syntax
Example
2.3.7.14. nsDS5ReplicaType
Defines the type of replication relationship that exists between this replica and the others.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.7.15. nsDS5ReplicaReapActive
This read-only attribute specifies whether the background task that removes old tombstones (deleted
entries) from the database is active. See
more information about this task. A value of 0 means that the task is inactive, and a value of 1 means
that the task is active. The server ignores the modify request if this value is set manually.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.7.16. nsds5Task
This attribute is used to launch a replication task, such as dumping the database contents to LDIF.
This is used internally by the Directory Server supplier.
Description
0 to maximum 32-bit integer (2147483647) in
seconds
86400 (1 day)
Integer
nsDS5ReplicaTombstonePurgeInterval: 86400
Description
cn=replica, cn=suffixDN, cn=mapping tree,
cn=config
0 | 1 | 2 | 3
0 means unknown
1 means primary (not yet used)
2 means consumer (read-only)
3 consumer/supplier (updatable)
Integer
nsDS5ReplicaType: 2
Section 2.3.7.13, "nsDS5ReplicaTombstonePurgeInterval"
Description
cn=replica,cn="suffixDN",cn=mapping
tree,cn=config
0 | 1
Integer
nsDS5ReplicaReapActive: 0
for
83