Register-Ds-Admin.pl - Red Hat DIRECTORY SERVER 8.1 Command Reference Manual

Chapter 7. Command-Line Scripts
Option
-p port
-S suffixDN
-U userDN
-v
-w password
-?
Table 7.31. ns-newpwpolicy.pl Options

7.4.15. register-ds-admin.pl

The register-ds-admin.pl script can be used for two things:
• Registering an existing Directory Server instance with a different Administration Server or
Configuration Directory Server.
• Creating a new, local Administration Server when only a Directory Server was installed previously.
IMPORTANT
The register-ds-admin.pl script does not support external LDAP URLs, so the
Directory Server instance must be registered against a local Administration Server.
Syntax
register-ds-admin.pl.pl [ --debug ] [ --log=name ]
Options
Option
--debug
--logfile name
310
Description
Specifies the Directory Server's port. The default
value is 389 or the LDAP port of Directory Server
specified at installation time.
Specifies the DN of the suffix entry that needs to
be updated with subtree-level password policy
attributes.
Specifies the DN of the user entry that needs
to be updated with user-level password policy
attributes.
Verbose mode.
Specifies the password associated with the user
DN.
Opens the help page.
Alternate Options
-d[dddd]
-l
Description
This parameter turns on
debugging information. For the
-d flag, increasing the number
of d's increases the debug
level.
This parameter specifies a
log file to which to write the
output. If this is not set, then
the setup information is written
to a temporary file. To not use