Cn=Config - Red Hat DIRECTORY SERVER 8.1 Command Reference Manual

Database Attributes under cn=monitor, cn=ldbm database, cn=plugins, cn=config
attribute, which is used for autosizing the entry cache and database cache, is used during the
Directory Server operations only and not during the ldif2db command-line operation; the attribute
value is the percentage of free physical memory to be allocated for the entry cache and database
cache.
If both the autosizing attributes, nsslapd-cache-autosize and nsslapd-import-cache-
autosize, are enabled, ensure that their sum is less than 100.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
3.4.1.24. nsslapd-mode
This attribute specifies the permissions used for newly created index files.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
3.4.2. Database Attributes under cn=monitor, cn=ldbm database,
cn=plugins, cn=config
Global read-only attributes containing database statistics for monitoring activity on the databases are
stored in the cn=monitor, cn=ldbm database, cn=plugins, cn=config tree node. For
more information on these entries, refer to the "Monitoring Server and Database Activity" chapter in
the Directory Server Administrator's Guide.
dbcachehits
This attribute shows the requested pages found in the database.
dbcachetries
This attribute shows the total cache lookups.
Description
cn=config, cn=ldbm database, cn=plugins,

cn=config

-1, 0 (turns import cache autosizing off) to 100
-1 (turns import cache autosizing on for ldif2db
only and allocates 50% of the free physical
memory to import cache)
Integer
nsslapd-import-cache-autosize: -1
Description
cn=config, cn=ldbm database, cn=plugins,
cn=config
Any four-digit octal number. However, mode
0600 is recommended. This allows read and
write access for the owner of the index files
(which is the user as whom the ns-slapd runs)
and no access for other users.
600
Integer
nsslapd-mode: 0600
175