Red Hat DIRECTORY SERVER 8.1 Command Reference Manual page 35

Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.24. nsslapd-auditlog-logging-enabled (Audit Log Enable Logging)
Turns audit logging on and off.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
For audit logging to be enabled, this attribute must have a valid path and parameter and the
nsslapd-auditlog-logging-enabled configuration attribute must be switched to on. The table
lists the four possible combinations of values for these two configuration attributes and their outcome
in terms of disabling or enabling of audit logging.
Attribute
nsslapd-auditlog-logging-
enabled
nsslapd-auditlog
nsslapd-auditlog-logging-
enabled
nsslapd-auditlog
nsslapd-auditlog-logging-
enabled
nsslapd-auditlog
nsslapd-auditlog-logging-
enabled
nsslapd-auditlog
Table 2.5. Possible combinations for nsslapd-auditlog and nsslapd-auditlog-logging-enabled
2.3.1.25. nsslapd-auditlog-logmaxdiskspace (Audit Log Maximum Disk
Space)
This attribute sets the maximum amount of disk space in megabytes that the audit logs are allowed to
consume. If this value is exceeded, the oldest audit log is deleted.
Description
cn=config
month | week | day
week
DirectoryString
nsslapd-auditlog-logexpirationtimeunit: day
Description
cn=config
on | off
off
DirectoryString
nsslapd-auditlog-logging-enabled: off
Value
on
empty string
on
filename
off
empty string
off
filename
Logging enabled or disabled
Disabled
Enabled
Disabled
Disabled
cn=config
21