Red Hat DIRECTORY SERVER 8.1 Command Reference Manual page 26

Chapter 2. Core Server Configuration Reference
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.3. nsslapd-accesslog-list (List of Access Log Files)
This read-only attribute, which cannot be set, provides a list of access log files used in access log
rotation.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.4. nsslapd-accesslog-logbuffering (Log Buffering)
When set to off, the server writes all access log entries directly to disk. Buffering allows the server
to use access logging even when under a heavy load without impacting performance. However, when
debugging, it is sometimes useful to disable buffering in order to see the operations and their results
right away instead of having to wait for the log entries to be flushed to the file. Disabling log buffering
can severely impact performance in heavily loaded servers.
Parameter
Entry DN
Valid Values
Default Value
12
Description
cn=config
• 0 - No access logging
• 4 - Logging for internal access operations
• 256 - Logging for connections, operations, and
results
• 512 - Logging for access to an entry and
referrals
• 131072 - Provides microsecond operation
timing
• These values can be added together to
provide the exact type of logging required;
for example, 516 (4 + 512) to obtain internal
access operation, entry access, and referral
logging.
256
Integer
nsslapd-accesslog-level: 256
Description
cn=config
None
DirectoryString
nsslapd-accesslog-list: accesslog2,accesslog3
Description
cn=config
on | off
on